...
×
Blog
Home > Blog

Top Questions to Ask Before Choosing a Bill Counter OEM Manufacturer

Oct 12, 2026

Choosing a bill counter OEM manufacturer is not a purchase – it is a partnership. The factory that builds your machines will shape your margins, your lead times and your reputation for years, and the cheapest quote is rarely the cheapest supplier once currency updates, spare parts and firmware support come into play.

The most effective protection is a structured conversation. Below are the 15 questions that separate a genuine manufacturing partner from a reseller with a nice catalogue – grouped so you can walk through them in one supplier meeting. Before you start, it helps to know whether you need OEM or ODM at all; if that is still open, read ODM vs OEM bill counter manufacturing first.

How to use this checklist

Ask the questions in order and write down the answers. For each one, give a score of 1 to 5 – vague, evasive answers score low even if the price is attractive. At the end, a supplier that cannot clear the capability, certification and IP sections is a risk you should not take, no matter how good the quotation looks. The section on choosing between ODM and OEM explains why the model you pick changes how heavily each answer should weigh.

AL 1600 Compact 170mm Bill Counter with LCD Display 2

1. Capability and R&D

  • 1. Are you a factory or a trading company?
    Ask for the factory address, the production floor area, and a live or recorded factory tour. A trading company can still be a good partner, but the price, lead time and engineering answers will all be second-hand.
  • 2. How large is your R&D team, and how many engineers work on firmware?
    A bill counter is software as much as hardware – currency recognition and counterfeit detection live in the firmware. If nobody in-house writes it, updates become slow and expensive.
  • 3. How do you handle currency updates and new banknote releases?
    Ask for the update mechanism (USB, SD card or remote) and the typical turnaround time. A new note that takes six months to support can strand your units in the field.

2. Certifications, compliance and currency coverage

  • 4. Which certifications do you hold, and can I see the certificates?
    Look for CE and RoHS as a baseline, ECB test evidence for the EU, and FCC for North America. Ask for the documents themselves, not logos on a web page.
  • 5. Which currencies and note versions are supported, and can you add mine?
    Confirm both counting accuracy and counterfeit detection for your market’s banknotes. A machine that counts a currency but cannot authenticate it is a liability. Multi-currency mixed-denomination platforms, such as the AL-920 counter with image, magnetic, infrared and UV detection, are worth evaluating against your currency list.

3. Customization and branding

  • 6. What exactly can be customized?
    Housing colour, logo, packaging, manual, firmware behaviour, currency set, interface. Get a written list rather than a verbal “anything you want”.
  • 7. Can you produce our own brand and model number, and what are the artwork requirements?
    Ask for the file formats and the approval workflow, so you know how long branding adds to the schedule.
  • 8. Is the customized model exclusive to us, and for how long?
    Exclusivity is often the whole point of moving from ODM to OEM. If it is not written into the agreement, assume it does not exist.

4. MOQ, pricing and payment

  • 9. What is the MOQ for a standard unit versus a customized one?
    Distinguish the trial-order MOQ from the production MOQ, and ask what changes if you reorder.
  • 10. What are the payment terms, and are samples available before a bulk order?
    Typical terms are a deposit before production with the balance before shipment. Always ask for a sample unit and test it with your own banknotes.

5. Quality control and testing

  • 11. What does your QC process look like, and what is your defect rate?
    Ask which tests run on every unit versus sampled, and how defects are recorded. A factory that cannot state a defect rate is not measuring one.
  • 12. Do you allow third-party inspection, and what does the warranty cover?
    A partner confident in its quality will welcome an inspection. Confirm what the warranty includes – and whether spare parts stay available across the whole warranty period.

6. Lead time, logistics and after-sales

  • 13. What is the lead time for a repeat order versus a first custom order?
    Repeat orders should be materially faster. If the two numbers are the same, the “custom” work may not be real.
  • 14. How is after-sales handled – spare parts, technical support and response time?
    A slow spare-parts channel will cost you customers long after the invoice is paid. Ask for the response-time commitment in writing.

7. Intellectual property and exclusivity

  • 15. Who owns the tooling, moulds and design files for our OEM project?
    Settle this before the first invoice, not after. If you paid for the tooling, the default should be that you own it – or at least have a defined buy-out option.

Red flags: answers that should make you pause

  • “We can do anything you want” with no written specification or timeline.
  • No factory visit, no production footage, no way to verify where the machines are actually built.
  • Certificates that exist only as logos, never as documents.
  • A defect rate of “zero” – a real factory measures and reports it.
  • Exclusivity promised verbally but omitted from the contract.
  • No in-house firmware team, but a promise of fast currency updates anyway.

Want the answers in writing, side by side?

Request our OEM capability pack – specifications, certifications, MOQ, lead time and spare-part terms – so you can compare suppliers on facts instead of sales talk.

Request the OEM capability pack

From questions to decision

Once you have scored the answers, the picture usually becomes obvious: a supplier that clears capability, certification and IP is a partnership candidate, while one that only competes on price is a stopgap. Use the scores to narrow the field to two or three factories, then order a sample from each. If you are still weighing whether to customize at all, the trade-offs between a badge-only program and a fully custom build are compared in ODM vs OEM bill counter manufacturing.

Why buyers ask ChuanWei these questions

ChuanWei has built cash-handling equipment since 2004 and manufactures in-house on a 20,412 m² factory floor, with a 25-person technical R&D team, more than 450 registered patents and 120 software copyrights, supplying over 515 dealers worldwide. That means the capability, firmware and IP answers above are not delegated to a third party – the same factory designs, builds, certifies and supports the machine, whether it ships as a white-label unit or a fully custom OEM model. Platforms such as the AL-950 dual-CIS cash sorter and the AL-910A mixed-denomination CIS counter are re-specified rather than reinvented for OEM projects, which is what keeps custom lead times realistic.

Ready to start your OEM project?

Send us your target market, volume and branding requirements — we will answer every question on this list and return a tailored quote within one business day.

Start your OEM project

FAQs

What is the most important question to ask a bill counter OEM manufacturer?

Ask whether they are a factory or a trading company, and ask to see the evidence. Everything else – price, lead time, engineering support and customization – depends on that answer. A trading company can be a legitimate partner, but you should know which one you are dealing with.

How many questions should I ask before choosing a supplier?

These 15 cover the essentials: capability, certifications, customization, MOQ and payment, quality control, lead time and after-sales, and IP. Asking all of them in one meeting is realistic, and scoring each answer makes suppliers directly comparable.

Should I order a sample before a bulk order?

Yes. A sample lets you test counting accuracy and counterfeit detection with your own banknotes, verify the build quality and confirm the firmware behaviour. The cost of a sample is trivial next to the cost of a bad production run.

Can I visit the factory before placing an order?

You should. A genuine manufacturer will welcome a visit or provide a recorded production tour. If a visit is refused or endlessly postponed, treat it as a strong warning sign.

Related Resources

×

CONTACT US

We only accept bulk order instead of retail sales, greatly appreciated for your kindly understanding.

Home
WhatsApp
EMail
Go Top

Cash handling redefined—reliable, efficient, and always on your side.

Quick Contact

    If you have any questions or need help,feel free to contact with our team.

  • +86 15757775967
  • [email protected]
  • No.1 Wangchang Central Road, Aojiang Town, Pingyang County, Wenzhou City, Zhejiang Province, China
Copyright © Zhejiang Chuanwei Electronic Technology Co., Ltd | 浙ICP备11052936号-6 | Privacy Policy
Seraphinite AcceleratorOptimized by Seraphinite Accelerator
Turns on site high speed to be attractive for people and search engines.